Showing 15226–15250 of 19445 results
The SKB 3I-0907-6-C Small Mil-Std Waterproof Case 6″ Deep (Black, , Cubed Foam) is an injection molded ultra-high-strength polypropylene copolymer resin case. It features a gasketed, water- and dust-tight, submersible design that is resistant to UV, solvents, corrosion, fungus and impact damage. The case is ATA category 1 rated. There is a continuous molded-in hinge,…
All the contents are safe inside the case in any weather condition. Useful while travelling outdoors in any weather conditions. Military grade design for maximum safety of all the delicate electronics. Provides continuous molded in hinge and trigger release latch system.
Ideal for storing and transporting delicate electronic items. Resistant to corrosion and impact damage. Waterproof and sumbersible design for more safety of the items inside the case. Contains automatic ambient pressure equalization valve. Can be used in all weather conditions without damaging the contents inside.
The SKB 3I-1209-4B-L Mil-Std Waterproof 4″ Deep Case is an injection molded ultra high-strength polypropylene copolymer resin case with a layered foam interior. It features a gasketed, water and dust-tight, submersible design that is resistant to corrosion and impact damage. The case is ATA category 1 rated. There is a continuous molded-in hinge, “trigger release”…
Perfect solution for storing and transporting delicate electronics. Resistant to corrosion and impact damage. Layered foam and padded dividers for extra safety of the items inside the case. Conatains automatic ambient pressure equalization valve.
Store, transport, and protect two cameras, up to four lenses, and related accessories with the watertight, dustproof, molded SKB iSeries 1309-6 Case with Think Tank Photo Dividers & Lid Organizer. The black case features two trigger latches, two metal-reinforced locking loops for optional padlocks, an automatic ambient pressure-equalization valve, and an over-sized top handle. Under…
The Mil-Standard Waterproof Case 6 with Cubed Foam from SKB is made from an injection-molded high-strength polypropylene copolymer resin that is not only impact-resistant, but UV, solvent, corrosion and fungus-resistant. The molded-in hinge provides additional strength. It features a gasket for watertight security up to approximately 3′. This case is typically used to store, and…
The empty Mil-Standard Watertight Case 6″ Deep from SKB is made from an injection-molded high-strength polypropylene copolymer resin that is not only impact-resistant, but UV, solvent, corrosion and fungus-resistant. The molded-in hinge provides additional strength. It features a gasket for watertight security up to approximately 3′. This case is typically used to store, and transport…
The black iSeries 1510-4 Waterproof Utility Case from SKB features an empty interior which can be customized to fit the items you are transporting. The injection-molded case is made of polypropylene copolymer resin and is waterproof, gasketed, dust-tight, and submersible (MIL-C-4150J). The case is also resistant to UV, solvents, corrosion, fungus, and impact damage. Molded-in…
Has a patented trigger release latch system It’s a perfect thing for storing your delicate equipments Has cubed foam, layered foam, padded dividers in the interior The handles are extra tough and durable Comes with a gasket-sealed, water- and dust-tight, submersible design
The black iSeries 1510-6 Waterproof Utility Case from SKB features an empty interior which can be customized to fit the items you are transporting. The injection-molded case is made of polypropylene copolymer resin and is waterproof, gasketed, dust-tight, and submersible (MIL-C-4150J). The case is also resistant to UV, solvents, corrosion, fungus, and impact damage. Molded-in…
The black iSeries 1510-9 Waterproof Utility Case from SKB features an empty interior which can be customized to fit the items you are transporting. The injection-molded case is made of polypropylene copolymer resin and is waterproof, gasketed, dust-tight, and submersible (MIL-C-4150J). The case is also resistant to UV, solvents, corrosion, fungus, and impact damage. Molded-in…
Has a cubed pull-and-pluck foam for customisation Comes with a unique top-mounted handle Designed to be water and dust resistant It’s also resistant to UV, solvents, corrosion, fungus and impact damage
The black SKB 3I-1610-5B-C Mil-Std Waterproof Case 5″ Deep with Foam is an injection-molded ultra-high-strength polypropylene copolymer resin case. It features a gasketed, dust and waterproof, submersible design that is resistant to corrosion and impact damage. The case is ATA category-1 rated. There is a continuous molded-in hinge, “trigger release” latch system, comfortable, snap-down rubber…
The black SKB 3I-1610-5B-E Mil-Std Waterproof Case 5″ Deep without Foam is an injection-molded ultra-high-strength polypropylene copolymer resin case. It features a gasketed, dust and waterproof, submersible design that is resistant to corrosion and impact damage. The case is ATA category-1 rated. There is a continuous molded-in hinge, “trigger release” latch system, comfortable, snap-down rubber…
Designed to be safe for submersion at depths of up to 1 m Double trigger release latches used for closing, with padlock holes available for additional protection Interior filled with cubed foam that can be plucked to fit your equipment The handle is foldable It’s dustproof and watertight in nearly all types of environments
mall Military-Standard Waterproof Case 6″ Deep (Empty) from SKB is constructed of ultra high-strength polypropylene copolymer resin and sealed against dust and water. The case is ideal for storing and transporting delicate electronics, A/V equipment, microphones, mixers, cables, computers or percussion and music accessories. The hard outer shell is impact resistant and features a rubber…
Has double trigger release latches with padlock holes available for additional protection The interior is filled with cubed foam that can be plucked to fit your equipment The handle is foldable It’s dustproof and watertight in nearly all types of environments
Resistant to UV, solvents, corrosion, and fungus and impact damage Has an ambient pressure equalization valve Comes with trigger-release latch system Waterproof and dust-tight design
Lid Pockets & Inner Foam, Desktop Rubber Cushion Grip Handle for easy carrying Has trigger Release Latch System and Automatic Ambient Pressure Valve Gasketed, Waterproof and Dust-tight to protect equipments Continuous Molded-in Hinge and layered Foam Interior
The black SKB 3i-1813-5B-E Mil-Std Waterproof Case 5″ Deep is an injection molded ultra-high-strength polypropylene copolymer resin case. It features a gasketed, water and dust-tight, submersible design that is resistant to corrosion and impact damage. The case is ATA category 1 rated. There is a continuous molded-in hinge, “trigger release” latch system, comfortable, snap-down rubber…
Has double trigger release latches with padlock holes available for additional protection The interior is filled with cubed foam that can be plucked to fit your equipment Continuous molded-in hinge for added protection It’s dustproof and watertight in nearly all types of environments Trigger release latch system is lockable with a customer supplied padlock
The black SKB 3i-1813-5B-L Mil-Std Waterproof Case 5″ Deep is an injection molded ultra-high-strength polypropylene copolymer resin case. It features a gasketed, water and dust-tight, submersible design that is resistant to corrosion and impact damage. The case is ATA category 1 rated. There is a continuous molded-in hinge, “trigger release” latch system, comfortable, snap-down rubber…
Store, transport, and protect two cameras, up to seven lenses, and related accessories with the watertight, dustproof, molded SKB iSeries 1813-7 Case with Think Tank Photo Dividers & Lid Organizer. The black case features two trigger latches, two metal-reinforced locking loops for optional padlocks, an automatic ambient pressure-equalization valve, and an over-sized top handle. Under…
Can be carried easily with its Rubber Cushion Grip Handle Has trigger Release Latch System and Automatic Ambient Pressure Valve Your equipments are protected by its Gasketed, Waterproof and Dust-tight design Continuous Molded-in Hinge and layered Foam Interior Comes with a cubed foam interior
End of content
End of content
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
Don't have an account yet? Sign up
No items in your cart. Go on, fill it up with something you love!
Start Shopping Now